Playstation Classic Project Eris Install |top|

Installation steps (typical, high-level)

: Use a low-capacity (ideally 4GB–16GB) USB 2.0 drive for the initial setup. playstation classic project eris install

After the first boot, the system will prompt you that FAT32 is no longer ideal for large game libraries: Project Eris does not permanently modify the internal

Modifying your console carries a small risk. Follow the instructions carefully. Project Eris does not permanently modify the internal NAND, meaning you can usually recover the system by unplugging the USB drive and restarting. Insert the USB drive into Controller Port 2

: Extract the Project Eris ZIP package and copy all files directly to the root of the USB drive. The First Boot Ensure the PS Classic is unplugged from power. Insert the USB drive into Controller Port 2 Plug in the HDMI and power cable.

: Once the install message appears or the console shuts down, remove the USB. On your PC, back up the files (especially the folder!), then reformat the drive to