Kmgd Test Point !new! »

A: No. For accurate resistance measurement, you need two separate contacts per node. Use two adjacent KMGDs spaced 2.54mm apart.

| Issue | Likely Cause | Fix | |--------------------------------|----------------------------------------------|--------------------------------------| | Breakpoint not hit | Wrong symbol / offset, or test point disabled | Check !sym , verify enabling flag | | System crashes (BSOD / panic) | IRQL violation or paged memory at high level | Use !irql , move code to PASSIVE_LEVEL | | Logs missing | Debug output filter too low | KdPrint level, ed Kd_DEFAULT_Mask | | High latency / missed events | Too many print calls | Use buffered ETW / tracepoints | kmgd test point

KMGD test points often require a flat, conductive surface. ENIG (Electroless Nickel Immersion Gold) or HASL (Hot Air Solder Leveling) are common, with gold being preferred for high-cycle testing due to its oxidation resistance. | Issue | Likely Cause | Fix |