Canon Service Mode Tool Version 1050 Jun 2026

Entering the wrong service code or using an incompatible tool version can "brick" the printer's logic board, making it unresponsive. Common Errors: Error 005: The printer is not detected (check USB cable). Error 006: The printer is not in Service Mode. Error 009: A hardware failure is preventing the reset.

be in Service Mode. Using the tool in standard "On" mode will result in an "Error 006" (not in service mode) or "Error 002" (function not supported). How to enter Service Mode (General) the printer (keep it plugged in). Stop/Reset While holding Stop, press and hold the , but keep holding While holding Power, press 5 times (on some models, it is 2 or 6 times). . The green light should blink and then stay solid. 🔍 Compatibility and Technical Details Release Era: v1.050 is an older version of the tool. Device Range: Most effective for older Pixma iP, MP, and MG series Modern Limitations: canon service mode tool version 1050

The tool will only communicate with the printer if the device has been manually put into Service Mode (usually involving a specific sequence of holding the "Stop/Reset" and "Power" buttons). ❗ Risk Notice Entering the wrong service code or using an

It is vital to note that . The Canon Service Mode Tool Version 1050 is specific to older PIXMA and select MAXIFY models that use the QHx logic board family. Based on crowdsourced repair data, v1050 successfully operates on: Error 009: A hardware failure is preventing the reset