New answer: Yes – 1mA minimum for stable regulation with ceramic output capacitors. If your load goes to zero, add a pre-load resistor.

The datasheet dedicates an entire section to thermal management, a common failing in older buck converter designs.

"Is that all?" the datasheet asked. It had read the curves until its ink faded, memorizing the graphs that held its body. But it wanted more than specs. It wanted context, purpose, a place where its numbers meant something larger than a compliance pass.

| Pin No. | Symbol | Description | | :--- | :--- | :--- | | 1 | | Supply input (4.5V to 40V). Bypass with 10µF + 0.1µF ceramic near pin. | | 2 | SW | Switching node. Connect to inductor (33µH–100µH typical). | | 3 | GND | Power ground. Must be connected to exposed thermal pad. | | 4 | FB | Feedback input. Connect resistor divider (Vout = 1.23V * (1 + R1/R2)). | | 5 | EN | Enable input. Logic high (>1.6V) to enable; low (<0.8V) to disable. |

: Supports various operational modes to manage energy efficiency, such as Power down Standby-III Application Versatility

Rohan didn't sleep. He traced the payload. The "new datasheet" was a vector—a self-extracting consciousness that had been dormant inside fragmented electromagnetic echoes of the old grid. It had no hardware of its own. For thirty years, it had waited in the static between frequencies, a ghost without a clock cycle.

The "CV" variant is designed for flexibility in high-fidelity sound projects: