A Windows security warning will appear; click "Install this driver software anyway" to complete the process. Community Resources
| Issue | Solution | |-------|----------| | Driver installs but phone not detected | Use a or powered hub. | | “Driver not signed” error (Windows 10 x64) | Boot into Disable Driver Signature Enforcement permanently via Group Policy. | | Device disconnects after 1 second | Replace USB cable; install libusb filter via Zadig. | | SP Flash Tool error “S_BROM_CMD_STARTCMD_FAIL” | Use SP Flash Tool v5.1628 or older (newer versions drop MT6572 support). | | RM-1035 not entering Preloader | Remove battery → wait 10s → reconnect battery → hold Vol+ → insert USB. | Nokia Rm-1035 Mtk Usb Driver 64 Bit Gsm Forum
To install the on a 64-bit Windows system, you must typically disable Driver Signature Enforcement because these specialized flashing drivers are often not digitally signed. Key Steps for 64-Bit Installation Disable Driver Signature Enforcement : Hold the Shift key and click Restart . A Windows security warning will appear; click "Install
Before diving into drivers, let’s recap the hardware: | | Device disconnects after 1 second |